41
The display shows the current volume level.
Volume can be adjusted in steps of two within a
range of 00 to 72.
The display shows the current treble level, here
neutral. Treble can be adjusted within a range of
-4 to +4.
The display shows the current bass level. Bass can
be adjusted within a range of -4 to +4.
The display shows the current balance setting,
here neutral. Balance can be adjusted within a
range of 8 to either side.
The display shows the current loudness setting –
ON if loudness is switched on and OFF if loudness
is switched off.
The display prompts you to store the current
sound setting. Press OK if you do.
Nice to know...
• When the BeoSound 9000 leaves the factory, all
these sound levels are set to neutral values
which will suit the majority of situations.
• All the current sound levels will be stored
simultaneously when you accept
SOUND OK?
.
• If you change your mind when
SOUND OK?
is
displayed and do not wish to store your
adjustments, simply press a source button on the
BeoSound 9000 control panel.
• To adjust volume, you just press the volume
buttons VOL
∧
or VOL
∨
; or press MUTE to
silence the speakers completely. To regain sound
press MUTE again or VOL
∧
.
• The loudness function is used to compensate for
the human ear’s lack of sensitivity to high and
low frequencies when listening to low volume
levels. It ”boosts” the low and high frequencies
so that the music becomes more dynamic.
• When the BeoSound 9000 is used in a fully
integrated system (see page 45), sound must be
adjusted as described in the guide for your video
system unless Headphones are connected to the
BeoSound 9000 (see page 42).
• If your BeoSound 9000 is connected with e.g.
BeoVision Avant in a fully integrated system,
TREBLE, BASS, BALANCE and LOUDNESS on your
BeoSound 9000 are
TV OPERATED
.