17
Choosing a sequence of discs
You can make BeoSound 9000 play
your favourite CDs in a particular
sequence. Every time a CD is included
in the sequence, the red indicator next
to the CD compartment lights up.
The CDs you have chosen will start
playing in numerical order. The CD
sequence will be played continuously
for up to 12 hours unless you switch
BeoSound 9000 to stand-by.
If you want to, you can override the
chosen disc sequence and listen to a CD
not included in the sequence. Simply
press the direct CD selection button
next to the CD you want to hear, and
playback will start immediately.
You can also choose to leave out a CD
which has already been included in the
sequence but only if you are still in the
SELECT option*. You press the direct
CD selection button again next to a CD
you have already included.
*Note: The SELECT option lasts for 25 seconds
from when you pressed SELECT. If you press a
direct selection button after the SELECT option
has ended, the disc you chose will start playback
immediately and override your sequence. When it
has finished playing, BeoSound 9000 will continue
playing the sequence you chose before.
Press to start playback of a CD
Press SELECT and
SELECT DISC
will
appear on the display
Press the direct CD selection buttons
next to the CDs you want to
include…
Press SELECT to start clearing a
sequence and play all six CDs
Press to clear the sequence
BEO4
Press LIST to display
SELECT
*
Key in the disc numbers you want
to include
Press LIST to display
SELECT
to
start clearing a disc sequence and
play all six CDs
Press 0 ( nil ) to clear the
sequence
*Note: In order to display
SELECT
on Beo4, you
have to add this function to the Beo4 list of
functions, please refer to your Beo4 user’s guide
and the chapter
Customizing your Beo4
for
further instruction.
LIST
LIST
1
6
through
then
0
then
CD
SELECT
SELECT
CLEAR
then
