Bang & Olufsen BeoSound 3000 Reference Book Download Page 9

Page: 9 / 31

When you have connected your

BeoSound 3000 to the mains, you

must make sure that it is set up to

function with the other products you

have connected, if any. This means

that you must programme the

BeoSound 3000 option. If you have

only connected speakers to the

BeoSound, you do not have to make

this programming.

The BeoSound 3000 has three different option

settings:

Option 0.

Used in a fully integrated Audio/Video

system with no speakers connected to the

BeoSound 3000. The sound is reproduced

through the speakers in the TV, or through

speakers connected to the TV.

Option 1.

Used when the BeoSound is used on its

own or in an Audio/Video integrated setup, with

active speakers connected to the BeoSound

3000 (factory setting).

Option 2.

Used in a two-room Audio/Video

integrated setup.

The programming is done with a Bang &

Olufsen remote control…

Using a Beo4…

Using a Beolink 1000…

Audio/video setup

Option 2

Option 0

Hold the • button down

while pressing LIST

Now let go of both

buttons

Press LIST until OPTION?

is displayed

Press GO

Press LIST once to

display A.OPT

When A.OPT is blinking

in the Beo4 display…

Key in the appropriate

number (0, 1 or 2)

Press SOUND

Key in the appropriate

number (0, 1 or 2)

Press STORE

A fully integrated Audio/Video system.

Option 1

The BeoSound 3000 as a stand-alone system.

Option 1

An Audio/Video integrated system set up in

one

room.

Option 2

An Audio/Video integrated system set up in

two

rooms.

Summary of Contents for BeoSound 3000
































Search results

Summary of Contents for BeoSound 3000

Reviews:

Related manuals for BeoSound 3000

Brands by name

Popular brands

Bang & Olufsen BeoSound 3000, Reference Book

Search results

Summary of Contents for BeoSound 3000

Reviews:

Related manuals for BeoSound 3000

Brands by name

Popular brands