19-2
BRIEF OPERATION GUIDE
Beolink Converter
The BeoLink Converter is intended for use in two
different setup situations:
1.
In a setup based on a Bang
&
Olufsen audio system
without the Master Link socket - and a BeoVision
equipped for Master Link connections (Diagram 1).
In this setup the following audio systems can be
used:
- Beosystem 7000 (or 6500).
- Beosystem 9300 (or 9500).
- Beosystem 4500.
- BeoCenter 2300.
- BeoCenter 2500.
2. In a setup based on an audio system equipped for
Master Link connections - and a video system
without the Master Link socket (Diagram 2). In this
setup the following Beovision TV's can be used:
- Beovision MX 7000/6000/4000 and LX 6000/5000.
- Beovision MX 5500/3500 and LX 5500/4500.
The system must be operated with i.e. a Beolink 1000
or Beo4.
19-2
BRIEF OPERATION GUIDE
Connections
Switch off the power for the entire system before
making the connections as shown on either Diagram
1,
Diagram 2 or Diagram 3:
•
A Master Link connection using a Master Link
cable.
•
An Audio Aux Link connection using an Datalink
AN
cable.
•
A Power Link connection using a Power Link cable
(Diagram 1). Only if no speakers are to be
connected to the audio system (Option 0).
Connect the video system and the audio system to the
mains before connecting the BeoLink Converter to
the mains.
Options
The main system can be pre-programmed for two
different room set-ups with a Beolink terminal.
Both systems in one room:
•
If the speakers are connected to the audio system,
the audio system must be programmed for option
1 and the video system for option
1.
Diagram 1
Diagram 2
Diagram 3
MASTER LINK
TV/ POWER
AUX LINK
AUDIO
AUX
LINK
MASTER LINK
I
MASTER LINK
TV/
',
AUX
o
19-2
BRIEF OPERATION GUIDE
•
If the speakers are connected to the video system,
the audio system must be programmed for option
0 and the video system for option 2.
Systems in two rooms:
•
The audio system must be programmed for option
2 and the video system also for option 2.
With both systems in standby
mode:
Using a Beolink 1000:
•
Audio system: Press SOUND, the option number
(0,2 or 1 ), and then STORE.
•
Video system: Press PICTURE, the option number (1
or 2), and then STORE.
Using a Beo4:
Hold the
•
button while pressing LIST. When the
display reads OPTION?, press GO.
•
Audio system: Press LIST once to display A.OPT.
Then key in the appropriate number (0, 1 or 2).
•
Video system: While the display reads V.OPT, key in
the appropriate number (1 or 2).
Proceed setting up the audio and video systems as
described in the user's guide.
Bang&Oiufsen
•