Bang & Olufsen BeoLab 2 6861, Repair Manual, Page: 3 / 20

Specifi cation guidelines for service use 1.9
SPECIFICATION GUIDELINE FOR SERVICE USE BeoLab 2
Type no. See type survey
Dimensions W x H x D / Weight 260 x 315 x 310 mm / 17.7 kg
Cabinet fi nish Aluminium, structure painted, grey
Power Consumption Typical: 15 watts
IEC65: 62W
Stand-by: 0.4 watts
Maximum Sound Pressure Level 110 dB
Power amplifi ers 1
Long-term maximum output power 850 watts
Effective Frequency range 23 - 120 Hz
Cabinet principle Double balanced passive radiator system
Magnetically shielded Yes
Woofer 1 x 9” (250 mm) fl at diaphragm
Passive radiators 2 x 9” (250 mm) fl at diaphragm
Net volume 13 litres
Bass equalization ABL (Adaptive Bass Linearization)
Switch for loudspeaker position Free, Wall or Corner
Input sensitivity Adjustable by three position switch
Corresponding to 83 dB, 88 dB or 91 dB for main speakers
Connections
Power Link - Input 1
Power Link - Output 2
Mains 1
Power Link plug
Pin 1 Loop through, Power Link plugs
Pin 2 Signal GND
Pin 3 Audio Left 0V - 2V RMS
Pin 4 Power Link speaker ON = > 0.5V, OFF = < 0.5V
Pin 5 Audio Right 0V - 2V RMS
Pin 6 Loop through, Power Link plugs
Pin 7 Loop through, Power Link plugs
Pin 8 Loop through, Power Link plugs
Mains Plug
Subject to change without notic e
Warning
Static electricity may destroy the product!
A static-protective fi eld service kit must always be used when replacement of the
modules takes place. Use the ESD mat area for both the new and old modules.
STATIC ELECTRICITY
MAY DESTROY THE
PRODUCT