3.6 Adjustments
Software update
It is very important that the product is updated to the latest software version
before it is returned to the customer. This is to ensure the customer receives the
best possible experience. Follow the procedure below:
Approach
Connect a service PC with ServiceTool. Follow the procedure below:
- Connect the ServiceTool hardware from the service connector on the product to
the service PC as shown:
Use ServiceTool cable (see Available parts) together with Standard Ethernet cable.
- Run ServiceTool.
- Be sure that ServiceTool is updated to the latest version. If not, upgrade and restart
ServiceTool.
- Scroll down to BeoLab section.
- Select
BeoLab 18
and click
Launch
.
- Click on the
PRODUCT
tab (if not already shown).
- Click
+
next to each item to expand the menus.
- Click
Software
->
Automatic Software Update
- Follow the procedure in ServiceTool.
I/O
Summary of Contents for BeoLab 18
