Bang & Olufsen BeoLab 18, Service Manual

Page: 22 / 66

3.2 Adjustments
Adjustments
Information
Depending on the repair there might be different kinds of adjustments/alignment
to be performed, after maintenance of the product.
Some adjustments has to be done with ServiceTool .
Adjustments or calibration is necessary when the following modules are replaced:
PCB30, Digital Sound Engine - when backup function is possible:
- Restore product data from the data backup
- Calibration of the amplifier (done automatically)
PCB30, Digital Sound Engine - when backup function is not possible:
- Restore product data from factory data (ID Restore)
- Calibration of the amplifier (done automatically)
PCB35, Amplifier :
- Calibration of the amplifier
PCB89, Wireless Power Link Rx - when backup function is possible:
- Restore product data from the data backup
- Connecting speaker wirelessly
PCB89, Wireless Power Link Rx - when backup function is not possible:
- Restore PCB89, Wireless Power Link Rx data
- Connecting speaker wirelessly
Speaker units :
- Calibration of speaker units