background image

The DVD OPTIONS menu on 
BeoCenter 2…

It is necessary to enter the following settings 
in the DVD OPTIONS menu on BeoCenter 2. 
For further information, refer to page 14. 

SCART SENSE OUT…

 If your system is connected 

directly to an MX 4000/4002/6000/7000, 
choose OFF. 

  If your system is connected to a BeoVision MX 

via an AV 2 Expander box, or if it is connected 
to any other Bang & Olufsen television, choose 
ON. 

DVD SOUND…

 If you want DVD sound via the 

speakers connected to the music system, 
choose PL/SCART. 

  If you want DVD sound via the television 

speakers only, choose SCART. 

SCART VIDEO OUT…

 If your system is connected 

to an AV 9000, BeoVision LX, BeoVision MS or 
BeoVision MX 4000/4002/6000/7000 
television, choose CVBS. 

  If your system is connected to a BeoVision Avant 

50 Hz television, choose Y/C. 

  If your system is connected to any other 

television, choose RGB/CVBS. 

PARENTAL LOCK…

 If you have forgotten your 

DVD pincode or you wish to reset the code, 
enter this menu and select YES. 

  You must now switch the BeoCenter 2 to 

standby and restart DVD playback. All previous 
settings for DVD playback will be reset and you 
must enter your settings again. 

What’s on the 

Initial Settings

 menu 

The 

Initial Settings

 menu enables you to choose 

your preferred settings for DVD playback. Settings 
in this menu cannot be entered during playback. 
The following options are available: 

Video Output…

 This menu allows you to select a 

picture format suitable for your television; 16:9 
(widescreen) or 4:3. If you have connected the 
BeoCenter 2 to the television with a S-Video 
cable, set 

S-Video Out

 to 

S1

.

Language…

 This menu allows you to store your 

preferred language for audio, subtitles and the 
disc menu, and to decide whether or not 
available subtitles should be shown during 
playback. If the languages you choose in this 
menu are available on the loaded disc, they will 
be used. 

   Some DVDs will require you to choose a subtitle 

language from a disc menu, even if you have 
previously selected a default subtitle language 
from the 

Language

 menu. 

Display…

 This menu allows you to select the 

language of the DVD main menus, to decide 
whether or not operation displays should be 
shown on the screen, and whether the angle 
indicator should be shown. The angle indicator 
is only available if the disc supports this feature. 

Options…

 Some DVDs feature a 

Parental Lock

 

level. If you specify a level lower that the one 
contained on the disc, the disc will not play, 
unless your pincode is entered. Some discs also 
support the 

Country Code

 feature. This means 

that the player does not play certain scenes on a 
disc, depending on the 

Country Code

 you set. 

Before you can set the 

Parental Lock

 level or the 

Country Code

, you must enter a pincode. You 

can change the pincode at any time. 

  If you forget your pincode, you must enter the 

DVD OPTIONS menu, and reset the PARENTAL 
LOCK as described to the right. The function is 
then deactivated. 

What’s on the 

Disc Navigator

 menu 

The 

Disc Navigator

 menu allows you to quickly 

step to specific titles or chapters on a disc. 

>> DVD operation – Correction for pages 16–18 

3504753

  

0401

 

Printed in Denmark by Bogtrykkergården a-s, Struer

Technical specifications, features and the use 

thereof are subject to change without notice.

Summary of Contents for BeoCenter 2













































Reviews: