6
Status LED
Front Panel
Status LED
The front panel has a green and red status LED which indicate if the amplifier is
turned on, in standby or in protection mode.
Green Red Status
ON
OFF
Amplifier is turned on and ready for use
OFF
ON
Amplifier is in standby mode
ON
ON
Protection mode
OFF
OFF
Shutdown, either due to no AC mains voltage or because
the power supply temperature is too high
In case of too high power supply temperature the amplifier will automatically
restart after 5-10 seconds, if the temperature is no longer too high.
Rear Panel
Mains
The amplifier has a mains plug on the back. It is an IEC 320 C18 power connector.
On/Off Switch
The amplifier has an On/Off switch on the back.
Stereo Mono
Line in PL in
Line
Input
Loop Out
Input
Speaker output
Zone gain
Loop Out
Min.
Max.
1
2
3
4
5
Input
Loop Out
R
L
PowerLink
On Of
Signal Sense
Loop Out
12V Trigger
R
L
Speaker
Outputs
State
Switches
Mains switch
AC Mains
Product label
12V Trigger
Line in/out
PL in/out
Zone gain
