Select
Recovery Console
to view the following menu options:
1.
Network Configuration:
This is used to configure the network settings for the Bandura
Cyber TIG's administration interface while in the Recovery Console.
2.
License Management:
This is used to edit the Bandura Cyber TIG's license file
information. Use this section only under instructions from the Bandura Cyber TIG
Support Team.
3.
Log File Management:
This is used to reset or clear the log files on the Bandura Cyber
TIG.
4.
Firmware Management:
This is used to restore the initial firmware that came the
Bandura Cyber TIG. Use this section only under instructions from the Bandura Cyber
TIG Support Team.
R.
Restart Bandura Cyber TIG:
This will reboot the Bandura Cyber TIG.
When the device is restarted, select Bandura Cyber TIG
from the menu
to initialize the
appliance. You can now remove the monitor and keyboard or serial cable.
If you have restored the firmware or reinstalled the license file, the Bandura Cyber TIG will be
reset to factory defaults. The web address for administration will be the default;
https://192.168.1.1:443
, and your computer must have an Internet address in the 192.168.1.0
network to connect to the Bandura Cyber TIG. See the Configuration section of this manual for
details.
The Recovery Console is an essential means for restoring your Bandura Cyber TIG, but its
presence may be a security risk. You will want to keep the Bandura Cyber TIG in a secure
location to prevent unauthorized use of the Recovery Console. Also consider the negative
87
