manually put an entry in this table, it may cause problems if you replace a node or replace that
node's Ethernet card, since it is likely that it will have a new MAC address.
You may also need an entry here if you create an IPv6 Transport
Mode
IPsec
connection to a
node that is on the same network as the administrative interface of the Bandura Cyber TIG. You
may need to enter the MAC address for that IPv6 address. If you don't provide a static entry for
that IPv6 address, the Bandura Cyber TIG might not be able to establish the IPsec connection.
You can add an entry to this table by clicking on
Add Arp Entry
. Enter either an IPv4 or IPv6
address and its corresponding hardware MAC address.
Here are the available actions for the ARP Table:
Edit
Edit an entry in the ARP Table. You cannot edit dynamic entries
Delete
Delete an entry in the ARP Table. If you delete a dynamic entry, it will
quickly appear in the table if the node is still active
55
