e-VISION 70/80 LED USER’S MANUAL
www.bnsmedia.com
05
Do not use a damaged or loose plug.
- This may cause electric shock or fire.
Do not pull the plug out by the wire nor touch the
plug with wet hands.
- This may cause electric shock or fire.
Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or
equipment damage.
Insert the power plug firmly so that it does not come loose.
- A bad connection may cause fire.
Do not excessively bend the plug and wire nor place heavy
objects upon them, which could cause damage.
- This may cause electric shock or fire.
Do not connect too many extension cords or plugs to one outlet.
- This may cause fire.
Do not disconnectthe power cord while using this product.
- A surge may be caused by the separation and may damage
this product
Do not use the power cord when the connector or plug is dusty.
- If the connector or plug of the power cord is dusty,
clean it with a dry cloth.
- Using the power cord with a dusty plug or connector may cause
electric shock or fire.
Do not drop this product when moving it.
- This may cause damage to the product or the person carrying it.
Keep any flammable objects such as candles, insecticides or
cigarettes away from the product.
- Otherwise, this may cause fire.
Keep any heating devices away from the power cable.
- A melted coating may cause electric shock or fire.
Put down this product carefully.
- Failing to do so may damage this product
Do not place this product face down.
- This may damage surface of this product.
The installation of the bracket must be done by a qualified professional.
- Installing the bracket by unqualified personnel may result in injury.
- Always use the mounting device specified in the owner’s manual.
When installing the product, make sure to keep it away from the wall
(more than 10 cm / 4 inches) for ventilation purposes.
- Poor ventilation may cause an increase in the internal temperature of the
product, resulting in a shortened component life and degraded performance.
Do not spray water or detergent directly onto this product.
This may cause damage, electric shock or fire.
