Appendix A
Mobile Panel 40/50 User's manual V1.80
131
A.3 Chemical resistance
A.3.1 Test description
A.3.1.1 Test 1
The test specimens are placed in a sealable box (365 x 260 x 200). A cotton ball moistened with approximately 5
ml of solvent is placed on top of the test
object
. A cup (250 ml) is put over the cotton ball to prevent the solvent
from evaporating too quickly. The cup and the cotton ball are then removed after 10 minutes. The residue solvent
is not wiped off of the test
object
. The box is closed back up immediately. The test
object
is left in the closed box
for at least 24 hours.
This test is performed at 20°C.
A.3.1.2 Test 2
The test specimens are placed in a sealable box (365 x 260 x 200). Approximately 5 ml of solvent are sprayed on
the test
object
. The box is then closed back up. The test
object
is left in the closed box for at least 24 hours.
This test is performed at 20°C.
A.3.2 Test results
Substance
Test passed
Problems / Not tested
Cutting oil - Test 1
•
LO-Smoke Levex 5047
•
Superfin 100
•
DIE-KOTE 7270-M
•
Handle
•
ZT rubber
•
Nameplate
•
Keyboard
•
Dummy plugs
•
Attachment cables
•
Illuminated button
•
Key
switch
•
Stop button
•
Display seal
•
Housing seal
•
Cover seal
•
Housing parts - Not tested
•
Handwheel rotary knob - Not tested
•
Potentiometer rotary knob - Not tested
•
Slot covers - Not tested
Cutting oil - Test 2
•
LO-Smoke Levex 5047
•
Superfin 100
•
DIE-KOTE 7270-M
Not tested
Unleaded gasoline - Test 1
•
Handle
•
ZT rubber
•
Nameplate
•
Keyboard
•
Dummy plugs
•
Attachment cables
•
Illuminated button
•
Key
switch
•
Stop button
•
Display seal
•
Housing seal
•
Cover seal
•
Handwheel rotary knob
•
Potentiometer rotary knob
•
Slot covers
•
Housing - Material becomes lighter in color,
white stains appear
Table 77: Chemical resistance test - Test results
