33
FPLMP138
FPLMP138
In
more
detail
. . .
4. Pull the recoil starter handle (
24
) lightly until you feel resistance then pull it rapidly.
Do it repeatedly until the engine starts (Fig.
17
, step
3
).
5. Rest the recoil starter handle (
24
) onto a hook (
23
) located on the right-hand side
of the upper handle bar (
1
).
NOTE:
If the engine does not start after repeated attempts, repeat steps
1
to
4
of the starting procedure.
6. When you are ready to mow, hold the brake clutch (
3
) with one hand, and pull the
drive clutch (
2
) towards the upper handle bar (
1
) (Fig.
17
, step
4
). The product starts
moving forward and begins mowing.
17
11
3
2
24
1
1
2
4
23
3
WARNING!
The starting position should be as described in the instruction
manual. Fig.
A
illustrates the defined starting position. The operator should
start the engine behind the upper handle bar (
1
). Do not start the engine while
standing on the side of the product as shown on Fig.
B
.
Operation
A
B
NOTE:
If the engine does not start, it may be flooded. Flooding is caused by
too much fuel injected into the combustion chamber and can prevent the engine
from starting. To resolve flooding follow the below procedure:
1. Remove the spark plug (
14a
) and dry it.
2. Pull the recoil starter handle (
24
) for several times to drain the fuel from the
combustion chamber.
3. Wait for
10
minutes until fuel vapours and refit the spark plug (
14a
). Clean
up any spilt fuel and move the product at least
3
metres away before starting
the engine to avoid any accidental fire.
Stopping
1. Release the drive clutch (
2
) to stop the self-propelled function (Fig.
18
, step
1
).
2. Release the brake clutch (
3
) to stop the engine and blade (
26
) (Fig.
18
, step
2
).
18
1
2
3
2
3663602423287-GB-V04.indd 33
27/9/2018 14:55
