38
FPLMP138
FPLMP138
In
more
detail
. . .
7. Lubricate the cutting means (
26
) after each use to prolong their lifespan. Apply
lubrication oil/grease along the edges of the cutting means (
26
).
20
26a
26b
26c
26
26d
26e
Torque wrench
(
40
-
45
Nm)
Grass catcher
1. Inspect the grass catcher (
22
) before each use. Do not use it if you find any damage.
2. Clean the grass catcher (
22
) after operation using water and mild soap.
3. Let the grass catcher (
22
) dry thoroughly before storing to avoid mildew.
Wires
Check the performance of the wires (
6
,
25
) before each use. Ask a qualified specialist
to adjust it if necessary.
WARNING!
Do not use the product with a defective or loose wire(s)!
Air filter
NOTE:
A properly maintained air filter (
12a
) helps to prevent dirt from entering
the engine. Entering dirt can cause blockages that can lead to premature engine
wear or problems with starting or running the engine.
Wash the air filter (
12a
) every
25
hours (in dusty conditions or when airborne debris is
present, clean more often).
1. Inspect the air filter (
12a
) regularly. Replace it with a new one if necessary.
2. Remove the cover (
12b
).
3. Remove the air filter (
12a
) and tap it on a solid surface to remove dust (Fig.
21
).
Clean it with clean water.
4. Apply a small amount of foam air filter oil on the air filter (
12a
) to increase its
performance. Wipe out surplus oil and put the air filter (
12a
) back into the case (
12
).
21
12
12a
12b
Spark plug
NOTE:
For good performance, the spark plug (
14a
) must be properly gapped
and free of deposits.
Inspect the spark plug (
14a
) every
25
hours or before long-term storage over
180
days.
Clean or replace with a new one if necessary (type:
LD K7TC
).
1. Disconnect the spark plug connector (
14
) (Fig.
22
).
2. Loosen the spark plug anti-clockwise using the spark plug wrench (
27
) and remove
it carefully (Fig.
23
).
Care and maintenance
3663602423287-GB-V04.indd 38
27/9/2018 14:55
