Descriptions of each option of the advanced system setup menu are as follows:
Zone ‘1’ Home Theater -
Allows adjustments for the main home theater zone. Set the max volume,
zone ID, Record loop and surround mode options.
Power On Titles -
Customize power on titles for customized
personal greetings.
Control Out -
Configure the 12VDC control outputs for control of
external devices via IR or voltage.
Security Options -
Lock the front panel, memory or front panel IR
sensor.
DSP Usage -
Displays processor status in MIPS.
RS-232 Control Port -
Configure the main RJ-45 jack for RS-232
communication.
Plug n Play Timing -
Adjust the timers for the digital Plug n Play
system. This is useful when adjusting for digital error muting.
Zone ‘B’ Second zone -
Allows adjustments for the second zone. Set the max volume, zone ID, Record
loop and the Zone A&B linking options.
Zone ‘1’ Home Theater
Max Level -
Set the maximum volume for the main theater zone. This can be used to protect your speakers
or ears from inadvertent excessive volume.
Zone ID -
The product ID (IR code set) can be adjusted if operation
with other B&K is gear is required. The default ID is 001 for the main
theater zone and 002 for Zone B. The receiver can be assigned to any
ID (B&K code-set) between 001 and 099. This allows ninety nine
different B&K surround processors to operate independently using
different remote controls. This feature is typically useful if multiple
surround processors are used in the same system (B&K CT whole
house audio systems). Zone A and Zone B cannot be assigned the
same code set. The code-set 000 operates both zones of the receiver
simultaneously.
NOTE:
If the code set of the receiver is changed, you will need to reprogram the IR code of the remote
control being used. B&K offers the SR10.1 programming remote (supplied with the B&K AVR517 Series2
and AVR515 Series2), the CK1.2 Keypad or MZ-128 remote.
V1 Output -
TAPE or LINE. The V1 output can be configured as an output for a second recording device in
Zone A (TAPE). The V1 output can also be configured as a Zone A line output to connect a second video
monitor and/or audio amplifier (LINE). As a record output, V1 will output the analog audio and video from the
selected input in Zone A except when V1 is selected. This prevents feedback through the recording device
which could damage your speakers. As a line output V1 will output the analog audio and video from whatever
input is selected in Zone A. Record/Line settings also apply to the Zone A optical and coaxial digital outputs.
Surround Modes -
Select from AUTO or MANUAL. Auto or manual engages or disengages the B&K Plug n
Play System.
Auto -
If set to AUTO, each time an input is selected the Plug n Play system will scan the various source
signals and determine if a multi-channel digital bitstream is present. The main theater zone will then use
the maximum number of hardware speakers specified in the speaker setup menu.
Manual -
If set for MANUAL, each time an input is selected, the user will select the audio mode that will
be used with the source signal, regardless of a what bitstream is present. Manual mode allows the
preferences setup in the Surround audio mode to apply both to multi-channel and 2 channel source input
signals.
33
ADVANCED S
SYSTEM S
SETUP
1 Z
Zone ‘
‘1’ H
Home T
Theater
2 P
Power O
On T
Titles
3 C
Control O
Out
4 S
Security O
Options
5 D
DSP U
Usage
6 R
RS-2
232 C
Control P
Port
7 P
Plug a
and P
Play T
Timing
8 Z
Zone ‘
‘B' S
Second Z
Zone
↑↓
next i
item E
ENT s
select
MENU m
main m
menu
ADVANCED Z
ZONE A
A S
SETTINGS
1 M
Max L
Level
+
+15 d
dB
2 Z
Zone I
ID 1
1
3 V
V1 O
Output
Tape
4 S
Surround M
Modes
Auto
↑↓
next i
item a
adjust
←→
MENU a
advanced s
setup
