B&K AVR101 Owner'S Manual Download Page 4 | Manualshive

Page: 4 / 60

background image

ACKNOWLEDGMENTS

Manufactured under license from Dolby Laboratories. “Dolby”, ”Pro Logic”, “AC-3", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby Laboratories, Inc. All
rights reserved.

DTS

®

is a registered trademark of Digital Theater Systems, LLC. Additionally licensed under the following US

Patent 5,451,942 & National Patent applications derived from PCT/US95/00959. Additional U.S. and Foreign
Patents pending. “DTS”, “digital sound”, and “coherent acoustics” logos are trademarks of DTS Technology LLC.
All rights reserved.

Motorola

®

,

, “Powered by Motorola”™, Motorola name and logo are registered trademarks of Motorola, Inc.

The AVR101 series 100 may be used to process Dolby Pro Logic and Dolby Digital

The AVR202 series 200 may be used to process Dolby Pro Logic, Dolby Digital, and DTS.

Accessories included: Owners manual, Remote control Manual, Power cord, Remote control, 4-AAA batteries

© Copyright 1998 All Rights Reserved.

B&K Components, Ltd., 2100 Old Union Road, Buffalo New York 14227-2725

Phone (716)656-0026, Fax (716)656-1291, http://www.bkcomp.com, E-mail: [email protected]

1

p/n 12699 Rev. 9812C

«
...
2
3
4
5
6
...
»

Summary of Contents for AVR101





























































Reviews:

No comments

Related manuals for AVR101

Brand: Garmin Pages: 6

Brand: Icom Pages: 48

Brand: Harman Kardon Pages: 42

Brand: Ericsson Pages: 3

Brand: Alinco Pages: 16

Brand: Boss Audio Systems Pages: 17

FTDX5000 - SOFTWARE UPDATE INFORMATION...

Brand: Yaesu Pages: 10

Brand: AMG Systems Pages: 8

Brand: Farenheit Pages: 12

Brand: Hammarlund Pages: 81

Brand: Lanzar Pages: 8

Brand: Xantech Pages: 3

AN/PRC-117D Series

Brand: Harris Pages: 40

Brand: ZENEC Pages: 48

RC4Magic Series 3 DMXio

Brand: RC4 Pages: 20

Brand: H-ITT Pages: 2

Brand: Eclipse Pages: 141

EWFS Haustechnik FZL

Brand: WAREMA Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands