Bandit ZT1844, Operating & Parts Manual

Page: 13 / 102

Bandit
11 Copyright 12/18
MODEL ZT1844
Do not attempt to operate the machine on an ascending or descending slope of more than 25° or 46% or
a side slope of more than 17° or 30%, it is Dangerous and could be Fatal. This is the maximum slope grade
the machine can be operated on if the hydraulic system, self propelled undercarriage, and engine are running
at maximum performance and good traction is sustained.
IF MACHINE IS EQUIPPED WITH A SELF PROPELLED UNDERCARRIAGE
Machines equipped with undercarriage tracks are shipped with a manual from the track manufacturer.
Refer to it for service, operation, and safety information.
SAFETY PROCEDURES
SAFETY PROCEDURES
WARNING
!
25° MAX.
17° MAX.
Maximum Slope Grade
Diagram shows percentage to degree of slope.
Percentage is in vertical feet for every 100 horizontal feet.
Ascending or Descending Slope Side Slope
100 FT. (30.5 m) 100 FT. (30.5 m)
46 FT.
(14 m)
(46%)
30 FT.
(9.1 m)
(30%)
25° MAX.
17° MAX.
The machine should never be parked on a slope
at any time. The machine can coast or creep causing
equipment damage and/or personal injury.
Make sure everyone is clear of machine before
moving the machine. Stay clear of undercarriage
travel system when the machine is moving.
DO NOT entangle feet or hands in undercarriage
travel system.
NEVER sit, stand, lay, climb or ride anywhere
on this machine while it is running, operating, or in
transit. You will be injured.
Use EXTREME CAUTION when traveling over
non-level surface! This machine can tip over or tip
backwards on non-level surface. You will cause
engine damage, machine damage and possible
personal injury!
Any increase from the specified maximum
operating angles may cause loss of lubrication
function and damage the engine.
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
WARNING
!