23656a GB/2019-06
13 / 24
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
2.2.2 Connecting the FA 110, FA 180 or FA 210
Connecting the tank drain with the suction side of the
fi
lter aggregate:
1. Before assembly, wrap all external threads with several layers of Te
fl
on tape.
2. Screw the G 1 – G ½ reducer and the hose socket to the three-way ball valve.
3. Slide the hose ends onto the hose sockets and secure using hose clamps.
Connecting the tank inlet with the pressure side of the
fi
lter aggregate:
1. Screw the hose socket to the
fi
ne
fi
lter ball valve.
2. Slide the hose ends onto the hose sockets (return
fl
ow and
fi
ne
fi
lter) and secure
using hose clamps.
3. Insert the return
fl
ow hose into the bath nearby the over
fl
ow gutter (short side or
long side at the rear) and secure using 2 clamping screws.
Return
fl
ow hose,
clamped to the tank
edge
Sprinkle tube
T
h
ree
-w
ay
ball
va
lv
e
Ultrasonic bath
RM 110 to 210
RM / TM 112 to 212
Information on
fl
ow direc-
tion within hose.
Filter aggregate
Ball valve, without oil separator
(remove over
fl
ow gutter)
Pre-
fi
lter
Ball valve
Fine
fi
lter
Summary of Contents for Sonorex Technik
Page 21: ......