5
4
Installation, assembly and connection
Assembly of the bracket:
- Place the bracket onto the lifting rod and fi x it with
the washer and the screw by hand.
- Align the bracket to the front (see picture).
- Hold the lifting rod with spanner 16 and fi x the
screw tightly (Allen key 5 mm).
Place the unit on an even and rigid base keeping
a distance of at least 10 cm between adjacent
structures.
Place the SONOREX TECHNIK RM unit with the feet
onto the feet supports.
Attach the provided stickers „warning of hand injury“ to well visible places at the ultrasonic
unit.
Connect the unit to a grounded socket 230 V~ (± 10 %) 50/60 Hz.
Hang the basket onto the bracket.
5 Start
• Set the desired oscillation time with the timer
processing time (oscillation) starts.
At the end of the desired time the oscillation stops.
Timed operation
- Turn the knob to the right
the green pilot lamp lights up.
- The timer switches off automatically after run-off of time.
- You can reduce the time or switch the unit off by turning the knob back.
Continuous operation
(
position)
- Turn the knob to the left
the green pilot lamp
lights up.
- The unit does not switch off automatically, turn the knob back to “0” in order to switch off.
• Motion downwards is caused only by the weight of the bracket and the weight of the goods to be
cleaned. If the motion downwards is blocked for some reason or other, the oscillation device will not be
damaged.
• The operational running noise of the oscillation is functional conditioned and can vary load dependent.
• At the end of the oscillation process the bracket might move down to the lower dead centre.
This motion is not a malfunction.
green
lifting rod
bracket
guide tube
feet support
timer
