![background image](http://html1.mh-extra.com/html/bandelin/184xib-00158520-001/184xib-00158520-001_instructions-for-use-manual_470810019.webp)
1786-001 en/2022-08
19/38
Operation
/5
• Type of soiling
• Type of goods to be treated, in particular materials
Note the information on the recommended sonication time from
the agent manufacturer. To begin with, select as short a sonication
time as possible to protect the objects to be sonicated and the
ultrasonic oscillating tank. Check the result. Lengthen the sonica-
tion time if the result is not sufficient.
5.4 Pour in sonication liquid
CAUTION
Risk of scalding
– Do not pour hot water into the ultrasonic oscillating tank.
– Maximum filling temperature: 50 °C.
NOTICE
Damage due to condensation in the ultrasonic bath
At high humidity, condensation forms inside the device if you fill it
with cold water.
– Do not pour cold water into the ultrasonic oscillating tank when
humidity is high.
NOTICE
If you use an agent in powder form, do not pour it directly into the
ultrasonic oscillating tank.
– Mix agents in powder form in another container before you pour
them into the ultrasonic oscillating tank.
– Only pour the agent into the ultrasonic oscillating tank once it
has dissolved completely.