Light Status
Battery
Solid
OK
Flashing
Replace
No light
Replace
3 . 0 C O D I N G A R E M O T E C O N T R O L
S T E P O N E
The opener can only be operated from remote
controllers that have been programmed into its
memory. Up to 64 remotes can be programmed.
Battery Type: 1 x CR2032.
W A R N I N G ! : The battery is hazardous and must
be kept out of reach of children. The battery can
cause severe of fatal injuries within 2 hours or
less if swallowed or placed inside any part of the
body. If you suspect the battery has be
swallowed or placed inside any part of the body,
SEEK IMMEDIATE medical attention.
S T E P T W O
S T E P T H R E E
Switch power on and
remove controls cover
till remote
LED lit
Press
repeatedly
HOLD
Opener
flashes &
beeps
HOLD for 3 sec
HOLD for 3 sec
RELEASE
Release both
buttons
S T E P F O U R
OFF
S T E P F I V E
Press to test
tip
Then replace controls cover
S T E P O N E
4 . 0 C H A N G I N G A B A T T E R Y
HOLD
Check Light
Status Table
S T E P T W O
tip
Use screwdriver
to remove scew
and open
S T E P T H R E E
Use non-metallic
object to push
out.
S T E P O N E
S T E P T W O
Take a pre-coded
remote and press the
button to duplicate
R E M O T E L Y C O D I N G A R E M O T E C O N T R O L
Remotely coding works when you have a
pre-coded remote control and are in range of the
opener.
tip
Use a pen,
HOLD for 2 sec
the middle button
through the
coding hole
S T E P T H R E E
Opener flashes & beeps
HOLD for 3 sec
HOLD for 3 sec
RELEASE
Take new
remote
RELEASE
S T E P F I V E
Press to test
Opener stops flashing &
beeping
