26
new COM port, it communicates directly with the remote serial device connected to
the serial server.
To set up a Virtual COM Port Mode connection:
1.
Connect the serial server to the network and a serial device as
described in previous sections.
Configure the serial server for VCOM operation (using Vlinx Manager).
Configure your software application to communicate via the virtual COM
port.
USING VESR9XX SERIAL SERVERS IN PAIRED MODE
When using serial servers in Paired Mode, two serial servers (connected to serial
devices via their serial ports) are connected to the network. The serial devices
communicate directly, transferring data between devices as a point-to-point serial
connection. Paired Mode set up as shown in the following diagram and configured
using Vlinx Manager software or web interface.
Paired Mode Setup
To set up a Paired Mode connection:
1.
Connect two serial servers to serial devices and to the network.
Configure the serial server for Paired Mode operation (using Vlinx Manager
or the web interface).
Summary of Contents for VESR901
