B&B VESR4X4 User Manual Download Page 49

Page: 49 / 70

Section 5

- Upgrading the Serial Server Firmware

Vlinx VESR4x4 Serial Server

Page 49 of 70

www.bb-elec.com/

www.bb-europe.com/

ECTION

Upgrading the Serial Server Firmware

Occasionally,  updated  firmware  may  become  available  for  your  serial  server.
The  firmware  can  be  upgraded  using  the  Vlinx  Manager  Software.  The
following procedure describes the firmware updating process:

Click the

Upgrade

button to open the

Firmware Upgrade

window.

Figure 45.

Firmware Upgrade Dialog Box

The name of the currently selected serial server appears in the top

drop

down list. Other serial servers (that have already been discovered) can be
selected from the drop down list, if desired.

The current firmware version of the selected serial server is shown in the
text below the serial server name.

Information about the selected firmware file is shown in the third text box.

Downloading Firmware Files

The

Firmware File

list (second box) displays all firmware files in the firmware

installation folder. Only firmware that is compatible with the selected serial
server is available in this list.

Summary of Contents for VESR4X4







































































Search results

Summary of Contents for VESR4X4

Reviews:

Related manuals for VESR4X4

Brands by name

Popular brands

B&B VESR4X4, User Manual

Search results

Summary of Contents for VESR4X4

Reviews:

Related manuals for VESR4X4

Brands by name

Popular brands