7. Operation
23
Item
Description
(m) CONTROL LEVER
Tilt the control lever from side to side to increase or decrease the numerical
value on the X side, and forward or backward to increase or decrease the
numerical value on the Y side.
If you move the lever all the way to the left side and LEFT OK! is displayed, all the
way to the right side and RIGHT OK! is displayed, all the way to the near side and
UP OK! is displayed, and all the way to the far side and DOWN OK! is displayed, it
is operating normally.
If OK is not displayed even when you move the lever all the way, calibrate the
lever. (See P-21 "(a) I/F CALIBRATION".)