7. Operation
11
7-3-2 Safety Inspection (After Power On)
Inspect the following points after turning on the power switch. If you discover an abnormality, turn off the
power switch immediately to stop operations.
Then, disconnect the power cord plug from the outlet and contact your distributor.
(1) Is any part of the power cord or plug abnormally hot?
(2) Does touching the machine give a tingling electric shock?
(3) Is there a burning smell, abnormal noise or vibration?
(4) Is there any other abnormality or malfunction?
7-3-3 Function Inspection (After Power On)
(1) Check the images. (See "7-6-5 Screen Adjustment (MONITOR TEST)".)
(2) Check the audio. (Is sound emitted from each speaker?) (See "7-6-6 Sound Adjustment (SOUND TEST)".)
(3) Check the lamps. (Do the view change buttons light up?) (See "(c) OUTPUT TEST".)
(4) Check each LED module (Does the LED module light up?) (See "(c) OUTPUT TEST".)
To inspect the following points, press the Service switch and actually play the game. (See "7-5-2 Adjustment
Switches".)
(1) Check the operation of the control lever. (Does the course of the vehicle change when you operate the
control lever?)
(2) Check the operation of the throttle lever. (Does the vehicle speed up or slow down when you move the
throttle lever forward or backward?)
(3) Check the operations of the main trigger and the special button. (Is a bullet fired when you press the
button?)
(4) Check the operation of the vibration motor. (Does the control lever vibrate when a bullet is fired?)
(5) Check the operations of the view change button. (Does the display change when you press the button?)