7. Operation
21
(a) I/F CALIBRATION
Calibrate the control lever assembly and the throttle lever assembly.
●
When the control lever assembly, the throttle lever assembly, the game PC board, or
the NA-JV (S) PC board is replaced, or the backup data is initialized, be sure to perform
calibration. Otherwise, the game may not work correctly.
1
In the I/O TEST screen, select I/F CALIBRATION and press the Enter switch. The I/F
CALIBRATION screen appears.
2
If you do not perform calibration, select EXIT and press the Enter switch to return to the I/O
TEST screen.
3
Move the Control lever assembly from side to side, forward and backward, and move the
throttle lever assembly forward and backward. When you strike the stopper, take your hands
off the levers.
4
Press the Service switch to complete calibration of the levers. The display will automatically
switch to the SWITCH TEST screen.
5
Confirm the status of the levers in the SWITCH TEST screen.
I/F CALIBRATION screen
（ａ）