1. Safety Precautions – Be sure to read to ensure safe operation –
2
1-3 Critical Safety Precautions
Should an abnormality occur, turn off the power switch immediately to stop
operations. Then, be sure to disconnect the power cord plug from the outlet.
accident.
Sections of the LCD monitor remain at a high temperature and high voltage
even after the power switch is turned off.
To avoid electric shock or burns, be careful not to accidentally touch these
sections.
!"
regularly and remove any dust.
Fully insert the power cord plug into the outlet. Poor contact may generate heat
!
#$$!
Be sure to observe the following.
% &!
% !
% !
% !
% !
% !
(Always unplug by holding the plug and not the power
cord.)
% ' !
%
devices or the wall.
% !
Do not expose the power cord and power cord plug to water. It may result in
electric shock or electrical leakage.
Do not touch the power cord plug with wet hands. It may result in electric shock.
The power capacity of the machine is AC 120 V (or AC 230 V), 3.2 A. To prevent
$#
!
Use a power supply voltage range of AC 110 V to 130 V (or AC 230 V). Using a
* $!+*#
ensure that the machine operates in the optimum condition, keep the voltage
at AC 120 V (or AC 230 V) as much as possible.
To ensure safe use of the machine, be sure to perform the pre-operation
/45 "
18
7 */
89!;* <
0
7 > !
inspections or service may result in an accident.
? */ 7
by our company. To order parts, contact your distributor.
Do not modify the machine without permission. Do not perform any operations
that are not described in this Operation Manual. Modifying the machine may
create unforeseen hazards.
If you decide to transfer the ownership of this machine, be sure to provide this
Operation Manual with the machine.
