BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Document # P46050 rev. -
© Copyright
BAND-IT-IDEX, Inc. 2008
All rights reserved
www.BAND-IT-IDEX.com
Page 3 of 4
GRC001 Hand Tool
Tool Assembly
Parts List
SEE SHEET 4 FOR REPAIR PART NUMBERS
SCREW RETAINING RING
TENSION HANDLE
SPIN GRIP
TENSION SCREW
SET SCREW
(On far side)
CUTTER BAR HANDLE
GRIPPER SPRING
TOOL FRAME
THRUST BEARING
SLIDE BLOCK
EXTERNAL RETAINING RING
VINYL GRIP
EXTERNAL RETAINING RING
CUTTER BAR
GROOVE LOCK PIN
BAND GRIPPER
1
1. To assist in removing threaded parts, apply heat (softens locking compound).
2. When connecting the tension screw to the slide block, clean threads (male and female) of
foreign matter, then apply two drops of medium strength locking compound (Loctite 242 or
equiv.) onto male threads and connect parts together. Apply .03 oz. of food-grade white lubricant
or equiv. to tension screw thread.
3. When connecting the set screw to the cutter bar, clean threads (male and female) of foreign
matter, then apply one drop of medium strength locking compound (Loctite 242 or equiv.) onto
male thread and connect parts together.
4. Kit # C00689 contains the C02078 Assembly and the C03882 Tension Screw. Both parts
should be changed as a set to reduce accelerated wear.
5. Kit # C01899 contains one each of a C01887 band gripper, C03186 gripper spring and
C01787 pin. Replace all parts as a new set to maximize tool performance. Periodic cleaning of
band gripper teeth will improve tool performance.