Bananza UHD 75, Installation, Operation & Service Manual

Page: 47 / 60

SECTION 15: R
EPLACEMENT
P
ARTS
39 of 47
SECTION 15: REPLACEMENT PARTS
See w arnings and notes
on Page 31, Section 13
before removing or replacing parts
Burner Components
All serviceable b u rner parts are accessed by the
door on the side of the heater. Remove the
sheetmetal scre
w s.
15.1 Gas Valve
Remove the gas s u pply pipe at the heater inlet.
Follo w steps on Page 40, Section 15.2 through
Page 40, Section 15.2.1 to remove gas valve/
manifold.
Replace in reverse order. V erify that the gas flo w
direction of the valve is correct. Use a minim u m
amo u nt of gas seal on the thread joint. Check that
all the joints are leak free. Reset gas valve. See
Page 28, Section 11.2.2
.
IT IS IMPORTANT THAT ONLY THE CORRECT
GAS VALVE IS USED WHEN REPLACING THESE
CONTROLS.
.
Carbon Monoxide Hazard
WARNING
Use only genuine BANANZA
®
replacement parts per this installation, operation and service
manual.
Failure to follow these instructions can result in death, electric shock, injury or property damage.
Explosion Hazard
DANGER
Electrical Shock Hazard
Fire Hazard
½PSI
I
N
C
O N
OFF
Flexi b le Air Duct
NOTE: Separated comb u stion
Description Part Number
Gas V alve, NG (Models UHD[X][S] 75 - 125) 90032505
Gas V alve, LP (Models UHD[X][S] 75 - 125) 90032506
model sho w n.