Banana Pi BPI-M2+, User Manual

Page: 70 / 88

H3 Manual build howto
banana pi BPI-M2+ use allwinner H3 chip onboard.
This page describes the process to combine Allwinners binary boot0, an SDK U-Boot, an
SDK linux kernel and other bits together to create a useful SD-card from scratch, the basis
for further hacking.
This page is only suited for H3 based devices, please look under See also for other manual
build howtos.
We of course do not build a whole distribution, we only build U-Boot, the kernel and a
handful of tools, and then use an existing rootfs to get a useful system. Depending on the
rootfs size, you might want to use a 2GB or larger SD Card. SD-card partitioning and
formatting will be taken care of later.
Link:
http://linux-sunxi.org/H3_Manual_build_howto
BPI-M2+
（
BPI-M2 Plus
）
H3 quad cord single board computer
70 H3 Manual build howto