Banana Pi BPI-M2+, User Manual

Page: 4 / 88

About banana pi BPI-M2+ (M2 plus)
Banana PI BPI-M2+ is the open source hardware platform,Banana PI BPI-M2+ is an quad
core version of Banana Pi,it support WIFI on board. use Alliwnner H3 chip on board. and
mini size only 65mm*65mm
Banana Pi BPI-M2+ series run Android,Debian linux,Ubuntu linux, Raspberry Pi image and
others image. Banana PI PBI-M2 hardware: 1Ghz ARM7 quad-core processor, 1GB DDR3
SDRAM, 8G eMMC flash on board,and SDIO wifi module on board.
Banana PI BPI-M2+ with Gigabit ethernet port, It can run with Android 4.4 smoothly. it can
easily run with the game it support 1080P high definition video output and 4K support, the
GPIO compatible with Raspberry Pi B+ and can support raspbian Image
Note:
Banana Pi BPI-M2+ not support sata port, so you need use USB for hardisk
Banana pi BPI-M2+ not support LCD interface.
For cost down version ,we may remove 8G eMMC and on board wifi module. so ,everyone
can free DIY on this board.
forum: http//www.banana-pi.org
forum: http://www.bananapi.com
product: http://www.banana-pi.com
BPI-M2+
（
BPI-M2 Plus
）
H3 quad cord single board computer
4 About BPI-M2+ (M2 plus)