Banana Pi BPI-M2+, User Manual

Page: 23 / 88

choose "0" must xunxi-ir
please note:value 0 value 1
press is:1
，
unpress is:0
key 64 MOUSE WAKE
key 24 BACK WAKE_DROPPED
key 83 VOLUME_DOWN WAKE
key 91 VOLUME_UP WAKE
BPI-M2+ keycode:
IR Address: 4040
1.how to do check IR address on Android.
echo 0xff > /sys/module/sunxi_ir_rx/parameters
<7>[ 625.998452] IR code = 0xf20d4040
<7>[ 625.998473] IR RAW CODE : 13
<7>[ 625.998542] IR CODE : 13
<7>[ 625.998629] IR KEY VALE 13
<7>[ 625.998653] ir_rx_irq_service: Rx Packet End, code=0xf20d4040, ir_code=0x
<6>[ 625.998717] cpus_wakeup_config_handler: address: 0x4040, powerkey: 0x0a
<6>[ 626.002717] cpus_wakeup_config_handler: ok
demo IR remote control on youtube:
https://www.youtube.com/watch?v=HhW_G85Byio&feature=youtu.be
BPI-M2+
（
BPI-M2 Plus
）
H3 quad cord single board computer
23 BPI-M2+ IR interface