SCALING INPUT 1 AND 2
mA min. value:
Setting range: 0 to 24 mA
Default setting: = 4 mA
mA max. value:
Setting range: 1 to 25 mA
Default setting: = 20 mA
In the Scaling menu, the percentage display can be assigned to a range of the mA measuring signal.
Display
Input signal
Menu measuring windows min
Menu measuring windows max
Example E1:
required setting:
Measuring signal 5 mA = display of 0%
Menu: Scaling E1 / mA min. = 5
Measuring signal 18 mA = display of 100%
Menu: Scaling E1 / mA max. = 18
FILTER (DAMPER)
Filter for attenuating fluctuations on measured values and interferences
Integration time adjustable from: 0.1 to 9.9 s
Default setting: 0.1 s
HOLD FUNCTION
For each one of both inputs a hold function can be activated
This makes it possible to hold the last measured value while the timer is active (relay A4).
Available setting values:
oF: Hold function switched off (factory setting)
on: Hold function switched on
The hold function only works when the timer (A4) is activated (on-time)
RESET TO FACTORY DEFAULT SETTINGS
Switch on the power supply
Within 3 seconds (i.e. during the test routine), press the pushbutton for approximately 5 seconds.
Display counts up
1, 2, 3, 4, ... 99, ST ....
→ all setting values are reset to the values of the factory setting
(Default values)
RE
10-02-2022
M-232.04-EN-AB
232-04
/6
4 limit value relays
EVEREST 214-S
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL
