SAFETY INSTRUCTIONS
- Installation, commissioning and maintenance may only be carried out by specialist personnel.
- Only connect the device to the voltage specified in the technical data or on the type label.
- The device must be disconnected from all sources of power during installation and maintenance work.
- The device may only be operated under the conditions specified in the operating instructions.
DESCRIPTION
The two-channel measuring amplifier EVEREST 214S is a processor-controlled display device for DIN rail installation. It has a built-in timer
and can supply sensors with 24V DC voltage. It converts 2 analogue signals into limit values. Freely scalable inputs and relays allow a wide
field of applications.
TECHNICAL FEATURES
Power supply
100 ... 240 V AC - 50/60 Hz
10 ... 30 V DC and 12 ... 24 V AC
Consumption
1 ... 5 W
Measurement inputs
2 Channels 4 ... 20 mA (factory setting) scalable from 0 to 25 mA
Supply to sensors
24 V DC, Max. 100 mA and 5 V DC, Max. 100mA
Measurement accuracy
0.5 % ± 0.5 Digit
Measurement filter
Adjustable from 0.1 to 9.9 s
Reset hysteresis
Adjustable from 1 to 99 %
Limit contacts
250 V AC, 2A / 30 V DC, 1A
Note:
The contacts are not protected against overload. Provide an external protective device.
Output relays S1, S2, S3 3 potential free contacts, common shared
Open / Close function settings
Output relay S4
Open / close settings or timer function from 1 s to 24 h
Display
2 ½ digit LED 5x7 dot matrix display
4x LED = limit value relay status
1x Blue LED = input 1
1x Green LED = input 2
Display resolution
1 %
Settings
Combined rotary / pressure switch
Electrical connection
Screw terminals, cable cross section Max. 1.5 mm²
Note:
Protection against accidental contact according to DIN EN 61010-1 is only guaranteed when installed in a closed housing with at least
protection class IP54.
Ambient temperature
-10 ... +45 °C
Housing:
For DIN rail 35 x 7.5 mm (DIN EN 50 022); Protection class IP40 according to EN 60 529
EC Conformity: The instrument meets the legal requirements of the current European Directives.
MAINTENANCE
Everest 214-S is maintenance-free if used for its intended purpose.
RE
10-02-2022
M-232.04-EN-AB
232-04
/3
4 limit value relays
EVEREST 214-S
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL
