THRESHOLDS
Hereafter: Detail of the steps to set the thresholds (Maximum 8):
To add a threshold, click on the symbol '' + '' then click on the threshold to set it up.
Each threshold can be assigned to relay or S1, or S2, or S3. These are open by default and close when energized.
Designation
Type the threshold name with the keyboard
Select the measurement parameter:
3 possibilities:
- Alarm TEMPO
- CYCLES
- TOTALIZER
Alarm TEMPO
Use this mode to assign a threshold to the TEMPO (configured from the main display - see § SETTINGS).
Threshold action
To assign the threshold to one of the relay or S1, or S2, or S3.
Example: Set up TEMPO at 10 seconds; After a dosing is initiated, if the counted volume does not reach the setpoint within the 10 seconds,
the "Alarm TEMPO" function will trigger and the assigned relay will close.
CYCLES
Use this mode to set an alert when the number of cycles reaches the value recorded in this menu.
Pulse mode ?
On / OFF
Select OFF for a "threshold" mode
Note: The contact will remain closed until operator acknowledges
Select ON to use “pulse” mode
If the selection is ON, enter the pulse duration in seconds in the menu.
Energized
Enter the number of cycles required to energize the relay
Threshold action
To assign the threshold to one of the relay or S1, or S2, or S3.
TOTALIZER
Use this mode to set an alert when the totalizer reaches the set volume
Pulse mode ?
ON / OFF
Select OFF for a "threshold" mode
Note: Contact will remain closed until operator acknowledges
Select ON to use “pulse” mode
If the selection is ON, enter the value of the pulse duration in seconds in the menu
''Energized duration''.
Energized
Saisir a volume
Threshold action
To assign the threshold to one of the relay or S1, or S2, or S3.
TEST OF RELAYS
This menu allows to manually test eacch relay.
When entering this menu, by default, the relays are at rest. To test a relay, press the SELECT key to switch from Rest mode to Energized
mode.
TOTALIZER RESET
Use this menu to reset the totalizer or/and cycles count, to zero, through the key RESET.
RE
30-03-2022
M-217.05-EN-AD
217-05
/10
Counter, Totalizer, Dosing
controller
BAMOWIZ DOZ
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL
