Section 8: Repairs
Bambi MAX Service Manual
– Models HL4000-HL9800 49
15.
Remove the weight and spacer from the lift bar,
install the cable over the five sheaves and trim the end
of the cable.
16.
Pass the cable to the inside of the carrier cross bolt,
through the cable bushing in the top plate.
17.
Turn on the power and open the valve to its fully open
position. Install the cable through the second cable
anchor and, then, pull the cable tight and secure with
cable anchor screws. Install a piece of 1/8" x 1" heat
shrink over the cable next to the anchor. Cut off the
excess cable as close to cable anchor as possible.
18.
Adjust valve to correct position (see
for more information).
