Section 8: Repairs
Bambi MAX Service Manual
– Models HL4000-HL9800 42
Bottom Seal Replacement
To change the bottom seal, it is recommended that the valve be pulled from the shell although it is not
necessary to detach the control cable from the IDS deployment line. Depending on circumstances, the seal
can be replaced while the valve is next to the shell, but the valve should be placed on a clean level surface
such as a piece of cardboard or plywood.
To remove the valve, please refer to the valve removal section in the maintenance section of this manual.
Once the valve has been removed, follow the procedure below.
1.
To make the valve more stable, open the valve until
the top of the tube is level with the top of the motor
and cut the power to keep it in this location.
2.
Turn the valve over.
