baltur TBML 350 ME, User Instruction Manual, Page: 57 / 88

OPERATING DESCRIPTION
Burner operation is fully automatic; it starts up by enabling the
main switch and the control panel switch.
Burner operation is managed by command and control devices.
The “lock-out” position is a safety position that the burner auto-
matically assumes when a burner or system component is not
working properly.
Make sure that there are no faults in the heating plant before
re-activating the burner by 'resetting it'.
The burner may stay in the lock-out position without any time li-
mits.
To reset it, press the specific button (RESET).
Lock-outs may also be caused by temporary faults; in these cases
if it is reset, the burner will start up without any difficulties.
If lockings continue to occur (3-4 times), do not continue with the
operation and, after having checked that the fuel arrives to the
burner, ask the intervention of the After-sales Service in your area.
Reset
ENGLISH
13 / 13
0006160077_201401