baltur TBG 45 P, Instruction Manual For Installation, Use And Maintenance

Page: 65 / 72

REDUCERS ASSEMBLY INSTRUCTIONS FOR LPG
In the event of functioning with LPG fuel connect the appropriate
reducers supplied with the burner.For the assembly of the reducers
follow the instructions below.
TBG 45 P
0002935830a
A
1
A
1) After loosening the fastening screws 1 remove the two reducers A
(N.2) from their respective seats.
0002935830b
2) Insert the two reductions B with holes facing towards the external
part of the mixer.
0002935830c
3) Position the slits C flush with the flame disc D as shown in the figu -
re; suitably secure the new reducers using the corresponding screws.
CAUTION / WARNINGS
In some particular applications, in the event that there are pul-
sations in the flame during the functioning of the burner with
natural gas, it is advisable to use the intended reducers for LPG
fuel.
TBG 60 P
1) After loosening the fastening screws 1 insert the two reducers A
(N.2) in their respective seats.
2) Make sure that the reducer outlet hole is flush with the flame disc
B as shown in the figure; suitably secure the new reducers using the
corresponding screws.
ENGLISH
29 / 34
0006160178_202002