baltur TBG 45 ME, Installation, Use And Maintenance Instruction Manual

Page: 50 / 72

ENGLISH
14 / 34
0006081532_201711
PREPARATION FOR TRAIN CONNECTION FACING UPWARD
If you wish to turn the train inlet upwards, before applying the burner
to the boiler, follow the subsequent procedure.
• Following the instructions detailed in the “Maintenance” section,
extract the mixer unit and remove the screw -8 which connects
the unit’s forward movement rod -14 to the gas delivery pipe
-15.Remove the screw -16 which connects the gas mixer -17 to
the pipe.
• Turn the elbow fitting -18 by 180° and the gas mixer -17 in such
a way that the inlet gas is facing upwards.Fix again the mixer and
unit forward movement rod to the gas delivery pipe.
• Remove the 4 nuts -19, slide the flame pipe -20 out of the relevant
stud bolts, put it back in position with the threaded connection for
anchoring the gas train turned upward.
• To complete the operation, fix the flame pipe to the burner screw-
nut and finally reposition the mixing unit in the relative housing.
At this point it is possible to install the burner in the boiler with the
valve train as shown in lay-out 9 illustrated in section "Gas train
assembly".
16
17
0002936600
15
14
18
8
19
20
0002936610