baltur TBG 1200 ME, Installation, Use And Maintenance Instruction Manual

Page: 55 / 64

ENGLISH
23 / 30
0006160152_201511
MAINTENANCE TIME
COMBUSTION HEAD GAS
ELECTRODES
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING,
CHECK DISTANCE, CHECK ELECTRICAL CONNECTION.
YEARLY
FLAME DISK INTEGRITY VISUAL INSPECTION FOR POSSIBLE WARPING, CLEANING YEARLY
IONISATION PROBE
VISUAL INSPECTION OF THE INTEGRITY OF CERAMICS. TIP GRINDING,
CHECK DISTANCE, CHECK ELECTRICAL CONNECTION.
YEARLY
COMBUSTION HEAD COMPONENTS INTEGRITY VISUAL INSPECTION FOR POSSIBLE WARPING, CLEANING YEARLY
INSULATING SEAL VISUAL INSPECTION OF LEAK TIGHTNESS AND POSSIBLE REPLACEMENT YEARLY
GAS DELIVERY FITTING GASKET VISUAL INSPECTION OF LEAK TIGHTNESS AND POSSIBLE REPLACEMENT YEARLY
AIR LINE GAS
AIR GRILLE/SHUTTERS CLEANING YEAR
AIR SHUTTER BEARINGS GREASING, (NOTE: apply only to burners with bearings to be greased) 6 MONTHS
AIR PRESSURE SWITCH CLEANING YEAR
AIR PRESSURE PIPES AND OUTLET CLEANING YEAR
SAFETY COMPONENTS GAS
GAS PRESSURE SWITCH OPERATIONAL TEST YEAR
VARIOUS COMPONENTS GAS
ELECTRIC MOTORS (BEARINGS/COO-
LING FAN)
CLEANING, (see if the supplier's indications were provided) YEAR
LEVERS/STRAP SYSTEM/BALL JOINTS
(BACKLASH/LUBRICATION)
CHECK FOR POSSIBLE BACKLASH YEAR
LINE FILTER CLEANING/REPLACEMENT (SPARE CARTRIDGE?) YEAR
COMBUSTION PARAMETERS GAS
TEST OF FUMES ACCORDING TO
BACHARACH INDEXES
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-
UP
YEAR
NOX TEST
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-
UP
YEAR
IONISATION CURRENT TEST
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-
UP
YEAR
FUME TEMPERATURE TESTING
COMPARISON WITH THE VALUES RECORDED UPON THE EQUIPMENT START-
UP
YEAR
GAS PRESSURE REGULATOR PRESSURE MEASUREMENT UPON START-UP YEAR
IMPORTANT
In case of heavy use or particular fuels, the maintenance frequency must be increased and adapted to the use conditions according
to the maintenance technician's indications.