baltur GI 1000 DSPG, Instructions For Use Manual

Page: 35 / 92

E
N
G
L
I
S
H
7 / 26
0006080767_201002
00
02
90
11
20
FUEL FEEDING HYDRAULIC DIAGRAM FOR ONE OR MORE LIGHT OIL BURNERS WITH MAXIMUM
NOMINAL VISCOSITY (5 °E
AT
50 °C) FROM 75 TO 300 DSPG
The combustible recovery and degasifier tanks (diameter ~ 150, height ~ 400) should be installed as near as possible to the
burner and should be about 0,5 m. higher with respect to the burner's pump.
1 Main cictern
2 Filter
3 Circulation pump
4 Water and system drain
6 Fuel recovery and degasifier
7 One-way valve
8 By-pass (usually closed)
9 Feeding circuit presure regulator
adjustment range between 0.2 and 1 bar
10 Pressure gauge (0 - 4 bar)
AT
THE BURNER
AT
THE BURNER
AT
THE BURNER
N° 8666-3
DIAGRAM OF PIPES OF FEED SYSTEM FOR LIGHT OIL BURNERS OR HEAVY OIL BURNERS WITH
MAXIMUM NOMINAL VISCOSITY (5 °E AT 50 °C)
The light oil recovery tanks (diameter ~ 150 - height ~ 400) should be
installed as near as possible to the burner and should be about 0,5 m.
higher with respect to the burner’s pump.
1 - Main tank
2 - Filter
3 - Circulation pumps
4 - Water outlet and circuit
5 - Air/gas outlet usulally closed
6 - Degasifierand combustion recovery tank
7 - No return valve
8 - By pass