baltur BT 75 DSNM-D, Instructions For Use Manual

Page: 58 / 76

N° B
T 8
57
6
20 / 36
98323_201501
ENGLISH
set. An orientative regulation can be carried out by operating
the pressure reducer in function with the value indicated by the
manometer; if necessary, correct the regulation after having
controlled the temperature of the fuel coming out of the steam heater.
When regulation has been carried out, close the air discharge gate
valve. The thermostats (minimum and regulation) of the electric
pre-heater should be regulate normally as described in Chapter
“Start up and Regulation”.
Steam Pressure at manometer
approximate bar
1 1,5 2 2,5 3 3,5 4 4,5 5 6 7 8
Corresponding Temperature °C 120 127 133 138 143 147 151 155 158 164 169 174
SCHEMATIC LAYOUT FOR STEAM PRE-HEATER INSTALLED
UPSTREAM FROM THE ELECTRIC PREHEATER
1 - LEAK DISCHARGE
2 - STEAM PASSAGE INDICATOR
3 - DISCHARGE CONDENSATE
4 - FILTER
5 - MANUALLY CONTROLLED BY-PASS GATE VALVE TO
EXCLUDE THE PRE-HEATER WHEN IT’S COLD
6 - ELECTRIC PRE-HEATER
7 - SELF CLEANING FILTER 0.3 MM
8 - THERMOMETER
9 - MIN PRE-HEATER THERMOSTAT
10- MAX PRE-HEATER THERMOSTAT
11- PRE-HEATER ADJUSTER THERMOSTAT
12- THERMOMETER
13 - PLUG FOR PRESSURE GAUGE
14 - STEAM PRE-HEATER
15 - CUT-OUT GATE VALVE
16 - STEAM PRESSURE REGULATOR ADJUSTABLE FROM 1÷8 BAR
17 - STEAM GAUGE 0÷10 BAR
A) STEAM ENTRY MIN 12 BAR
B) AIR DISCHARGE
C) DISCHARGE CONDENSE
TO BE INSTALED BY
THE CUSTOMER
FROM BURNER PUMP
AT THE NOZZLE