background image

 

1.  SAFETY MEASURES INDICATION 

1.1. In order to avoid accidents and the appliance

’s breakdown it is prohibited to: 

- Install and put the appliance into operation by yourself; 
- To switch the appliance on and regulate it in case if the person is not acquainted with this manual; 
- To close the grid or the spacing on the bottom part of the door or wall, which are designed for the inlet of air, necessary 
for gas burning, in the premise where the appliance is installed; 
-  To use the appliance in case of no draught in the smoke exhauster; 
-  To use the appliance violating the rules stated in this manual, and to use the appliance when it is out of service; 
-  To disassemble and to repair the appliance by yourself; 
-  

To insert changes into the appliance’s construction; 

-  To leave the appliance unattended when it is in operation; 
- To touch the casing next to the glory-hole and in close proximity to it, and also the combustion products outlet pipe next 
to the gas removal device of the appliance when the appliance is in operation, as the temperature of these surfaces might 
exceed 

100 °С. 

1.2.  If water freezing in the water system of the appliance is possible, it is  necessary to drain the water out of the appli-

ance. 

 

1.3. In case of detection of failure in the appliance

’s operation it is necessary to address to a specialized service organiza-

tion and not to use the appliance before the failure is eliminated.  

1.4. In case of the appliance

’s normal operation and in case if the gas pipeline is failure-free there must not be the smell of 

gas in the premise. 

IN CASE IF YOU FEEL THE SMELL OF GAS YOU MUST DO THE FOLLOWING:

 

a)  Close the gas inlet tap, located on the gas pipeline by the inlet into the appliance; 

b)  Open the windows and doors in order to ventilate the premise, providing maximum fresh air inlet; 
c)   Do not switch on or off the electric light or any other electronic appliances; 
d)  Do not use open fire (lighter, matches etc.); 
e)  Do not use the telephone in a gas-polluted premise; 
f)  Do not smoke; 
g)  Call the gas facility emergency operation service immediately. 

In case of non-fulfillment of the above-listed safety measures gas  poisoning or poisoning with carbonic oxide (CO), con-

tained in gas incomplete combustion products may occur. 

The first symptoms of poisoning are: heaviness in the head, strong palpitation, buzzing in the ears, swimming of the head, gen-
eral weakness. Later nausea, vomiting, scant of breath and disordered motor functions may appear. The injured person may 
suddenly lose consciousness. 

In order to provide first aid it is necessary to: 

a)  Bring the injured person outdoors into the fresh air; 
b)  Unclasp clothes that constrain breath; 

c) Give household ammonia to smell; 
d) To cover warmly, but not letting to fall asleep and call the ambulance. 
I In case if there is no breath you must immediately bring the injured person to a warm premise with fresh air and make resusci-
tation, not stopping it before the doctor arrives. 

Summary of Contents for NEVA-4511



























Reviews: