10
Please Note:
-Only attach the camera to surfaces that can hold the fivefold weight of the camera.
-Use cables in flawless condition only. Creased cables can damage the camera and are a FIRE HAZARD!
-Make sure that no persons are in the danger zone during installation.
Opening the camera
Attention: Do not touch the camera‘s
lens!
&
2.2.3 Installing IP-D1443VR
1.
Loosen the Torx-Screw
2.
Lift the cover.
3.
Lift the interior cover.
When using a camera with an microSD slot, read the
chapter
„Inserting microSD cards“ on page 8
.
4.
Mark the boreholes using the dril-
ling template.
7.
Attach the inner cover.
8.
Attach the casing.
9.
That‘s it!
5.
Drill the holes and insert dovels.
Connect the cables to the corresponding
connectors.
6.
Attach the camera.
Next, you should align the lens and adjust the
zoom, depending on the camera‘s model.
Read chapter
„Manually adjusting zoom and
focus“ on page 7
for instructions.
Attention! The dome is connected to the base
with a wire. For a more comfortble installa-
tion you can loosen the wire and completely
remove the dome.
