Device for bearing diagnostics using shock pulse method
Operation manual
Section 4 Operation
17
Figure 4-3.
Setting rpm and diameter. Step 2.
Press the M key to exit the setting mode.
Note
When dBi is lower than -9 or higher than 40, the display shows “--” (two
hyphens).
Shock pulse measurement:
Switch on the tester BALTECH VP-3450, the last reading and dBi value will be
displayed.
If necessary, change the dBi value
Move the sensor to a measurement point;
Press the M button.
Figure 4-4. Shock pulse measurement.