Device for bearing diagnostics using shock pulse method
Operation manual
16
Section 4 Operation
Figure 4-1. Direct change of the initial dBi value.
Press the UP key to increase the dBi value and the DOWN key to decrease
the dBi value;
Press the M key to exit the setting mode.
2) Setting rpm and diameter
Press the SET key to open the menu.
Press the SET key again to move the cursor to the rpm input field. Input
the rpm value. Use the RIGHT key to move from one digit to another. The
maximum rotation speed is 19,999 rpm (Figure 4-2).
Figure 4-2.
Setting rpm and diameter. Step 1.
Press the SET key to move the cursor to the diameter input field;
Input a diameter value. Use the RIGHT key to move from one digit to
another. The maximum diameter value is 1999 mm;
Press the SET key to display the dBi value (Figure 4-3).
