5
4.)
Illustration # 3
5.)
Illustration # 4
P-5
A9
P-8
A 4
P-4
Turn the Keyboard Platform (P-8) over and attach the Mouse Holder (P-5) using four Screws (A9)
into the predrilled holes. Attach the two Keyboard Back Brackets (P-4) to the back edge of the
Keyboard Platform using one Screw (A4) in each bracket as shown in illustration #3.
Slide the Keyboard Arm (P-14) down Pole (P-1) and tighten the clamp lever. Attach the
Keyboard Platform assembly from Step 4 to the Keyboard Arm using four Screws (A4) as
shown in illustration #4.
A4
P-1
P-14
Illustration # 5
6.)
Loosen the clamp lever on the Monitor Pole Clamp (P-17) and slide it down the Pole (P-1).
Tighten the clamp handle to secure the Monitor Pole Clamp to the Pole. See illustration #5.
Clamp Lever
P-1
P-17
Clamp Lever
