16
EXCARD
TYPE
Typ=TAP
Flt=35
Select the type of effect and setting of the low-pass filter.
List of abbreviated types explained
Type (0..7) set the type of effect:
TAP = Tape Echo
PPG = Echo Ping Pong
ECH = Clean Echo
GAT = Reverberation "Gate"
PLA = Reverberation "Plate"
SHL = Reverberation "Small Hall"
LHL = Reverberation "Hall"
BAL = Reverberation "Baloran"
Flt (0..63) sets the frequency of the low-pass filter applied to the input signal. This allows muting the
repetitions or reflections. An invaluable setting!
EXCARD
EFFECT
Dly=76
Rep=-12
Control of delay and re-injection.
Dly (0..200) sets the delay of the effect for the echoes as well as for reverberations. Rep (Off..+10) sets
the volume sets the effect delay for the echoes as well as for reverberations. Rep (Off..+10) sets the
output re-injection level over the delay input. For echoes, Rep sets the number of repetitions up to the
specific auto-oscillation encountered in the tape echo chambers. For the reverberations the Rep control is
only useful only near auto-oscillation.
EXCARD
WAVE
Wav=Sin
Rat= 10
Control of the waveform and of the delay modulation speed.
Wav sets the signal waveform which modulates in turn the effect delay.
Non = (None) No modulation
Sin = (Sinus) Sinusoid
Tri
= (tRIANGLE) tRIANGLE
Squ = (Square) Square
S&H = (Sample & Hold) Random samples
Rnd = (Random) Random modulation
Tap = (Tape) Simulation of speed variation of a Tape Echo. For greater realism the last modulation has
been recorded from a Tape Echo.
Rat (0..360) sets the modulation speed. Fast modulation cannot be heard on reverberations. For a good
simulation of the wow of a Tape Echo set Wav on « Tap », Rat at 12-15 and Mod at 8-10.
CARD
OTHER
Mod=27
H/P=+2
Sets the amplitude of the modulation and of a specific parameter of the
effect.
Mod (0..100) sets the amplitude of the modulation. H/P (Off..+10) sets the specific parameter of the
effect type:
FV-1 Echo
= Volume of the second play head.
FV-1 Reverberation
= Reverberation pre-delay